AL-600SA Wire Cut EDM
AL SeriesAL-600SA
Download
INQUIRY BACK PREV NEXT
  • Specifications
  • Character
  • Related Products
Max. Workpiece SizeL x W x H (mm) 990 x 620 x 295
Max. Workpiece Weight (Kg) 550
X/Y Stroke (mm) 600 x 400
U/V Stroke (mm) 100 x 100
Z Stroke (mm) 300
Max. Cutting Taper (H=100) ±21°
Wire Spool Weight (Kg) 10
Foot Print W x D x H (mm) 2480 x 2980 x 2210
Water System Capacity (L) 900
Machine Weight (Kg) 3700
(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.

Controller Specifications

Controller System Windows
Control Device 64 - bit Industrial PC
Storage Device ≥ 30GB SSD
Screen Display Color TFT Touch Screen
Data Input Keyboard, Mouse, USB, Ethernet, FTP
Servo control method Full closed loop (Linear scale)
No. of Control Axes 5 Axes/ 6 Axes (Opt.W Axis)
Simultaneous Axes 4 Axes/ 5 Axes (Opt.W Axis)
Min. Command Unit 0.0001mm/ 0.00001 inch
Max. Command Range ±9999.9999mm
Command Type mm/ inch
Cutting data Memory 99999 Sets
Power type MOSFET Non-electrolysis power
Ignition Power Supply 32 Steps，53V～138V
On time 24 Steps
Off time 43 Steps
Discharge Mode Rough Cut/ Skim Cut/ S Power/
MST Power available for AP/AZ series only


Controller Functions
Backlash compensation Pitch compensation Program management Program edit
Program simulation
Anti- collision Cutting path display Linear/ Circular interpolation Auto corner
N code move Sub program Multi-blocks skip Corner control function
MDI function Taper setting 4 axes cutting M01 stop
Single block Mirror program rotation Axis exchange
Short back Constant feed/ Servo feed 2nd software limit Axis Rotation
Auto aligment
(edge, center)		 Dry run Single block stop Reference point setting
Reference point return Retrace to start point/
Start point return		 Auto Power recovery (Option) Diagnosis
Cutting log Maintenance dashboard Auto compensation for wire comsumption Lead-in/ Lead-Out Control


Standard Accessories

  • Upper/ Lower Flushing Nozzle
  • Diamond Guide
  • Conductor Plate
  • Diamond Guide Remove Jig
  • Brass Wire
  • Tool Box
  • Waste Wire Bin
  • Ion Resin Tank
  • Ion Exchange Resin
  • Paper Filter
  • Vertical Alignment Jig
  • Water Chiller
  • SD Master
  • Auto Wire Threading (AWT)

Optional Accessories

  • Spray mist Lubricator
  • Pilot Lamp
  • Remote Master
  • Safety Door Interlock
  • PCD/ Graphite Cutting
  • 0.1mm Wire Application
  • Transformer
  • 45Kg Wire Jumbo Feeder
  • Auto Voltage Stabilizer
  • X/Y Linear Scale
  • 6th Axis Package (W axis)
  • Alarm Messenger
  • MST
    (AL-400SA/ 500SA/ 560SA/ 600SA)
  • High Pressure Water Jet Threading
    (Not Available with Anti-Collision on Z Axis)
※ All the specifications are subject to change without prior notice.

Linear Shaft Motor

Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%

1/1000 High Resolution Signal Process

High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.

Stable Discharge Board (SD-Master)

Irregular Thickness Cutting

The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.

PCD Cutting & Graphite Machining Power supply

The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.

BACK