Wire breakage occurs easily at the corner because of imperfect flushing conditions
after passing the corner. Unstable electrical discharging and consecutive short circuits
make the wire break and interrupt the cutting process.

断线常发生在过转角处， 因为加工过了转角会有排渣不良现象
造成放电不稳定与连续短路，容易发生断线。

-

AccuteX releases the new PWBS to stabilize discharging and prevent wire breakage,
the cutting speed still can remain at 150mm2 /min at the corner.

 AccuteX 推出新PWBS电源，可稳定放电与防止断线
在转角处切割速度仍可能保持在150mm2 /min。