徕通科技

EtherCAT 等级控制系统

EtherCAT 等级控制系统

2023-03-07

⚙ EtherCAT level control system

???? Dual industrial-grade PCs are equipped with high-performance CPUs and adopt Ethernet serial
architecture to achieve high-speed and real-time synchronous motion.The convenient EtherCAT universal
expandability enables the machine to have more intelligent application.

1⃣Motor Torque Monitoring System
Press a single key to initate the auto-measurement of the full stroke torque, auto-measruement of specific
area.Ensure this is interference-free machining.

2⃣ Built-in CAD/CAM
Process the complete POST-process before the cutting.The new controller has built-in the specified
third-party post-processing software which supports loading the CAD drawing files. The NC program
can be generated on the machine after the standard post-process.

3⃣ Fast Geometry simulatio
Drawing speed increased by 300% and is able to have 3D full viewing. For large-scale programs.
Rapid simulation speed.switch between 2D / 3D viewing, and viewing all detail position. In 3D mode,
drag to change the viewing angle, and use the mouse wheel to zoom, clearly check the cutting path
and improve the processing quality.

4⃣ Processing history library
Quick checking the machining result. The processing speed, discharge gap voltage, and other processing
information are recorded by multi-tools in the whole path, and the user can quickly browse and check the
processing process, Especially for the corner arc path and finishing process, the final machining result can
be confirmed.

-

#EtherCAT 等级控制系统
???? 双工业级 PC 搭载高效能 CPU
采用乙太网路串联式架构,达到高速即时的同步运动
便捷的 EtherCAT 通用扩充性,使机台更具备智慧化的应用。

1⃣ 马达扭力监看系统
|100%机台全行程扭力自动量测|
一键启动机台全行程扭力自动量测,加工前单键执行
了解全行程运行扭力状态,确保加工过程无干涉。

2⃣  内建 CAD / CAM
|单机完成后处理作业程序|
安装指定第三方后处理软体,进行机上绘图或直接输入CAD图档
完成后处理程序后产生加工程式。

3⃣ 绘图速度快
|绘图速度提升300% 3D全视角检视|
针对大图程式可流畅快速绘图,切换 2 D / 3 D 检视
可前后迅速检视任意检视位置。 3D 模式下拖曳改变视角
搭配滑鼠滚轮缩放,可以清楚检视加工路径,提高加工良率。

4⃣ 加工履历库
|加工履历检索记录|
全路径多刀次记录加工速度、放电间隙电压
与其它加工资讯使用者快速浏览与检视加工历程
特别针对转角圆弧路径与精修过程,可确认最终加工成果。