Wire Cut EDM Manufacturer

  • AL-600SA

AL-600SA

Linear Shaft Motor

Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%

1/1000 High Resolution Signal Process

High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.

Stable Discharge Board (SD-Master)

Irregular Thickness Cutting

The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.

PCD Cutting & Graphite Machining Power supply

The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.
Max. Workpiece SizeL x W x H (mm) 990 x 620 x 295
Max. Workpiece Weight (Kg) 550
X/Y Stroke (mm) 600 x 400
U/V Stroke (mm) 100 x 100
Z Stroke (mm) 300
Max. Cutting Taper (H=100) ±21°
Wire Spool Weight (Kg) 10
Footprint (mm)W x D x H 2480 x 2980 x 2210
Water System Capacity (L) 900
Machine Weight (Kg) 3700


(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.

Controller Specifications

Blacklash compensation   WINDOWS CE
  Control Device   64-bit Industrial PC
Memory Device   1GB CF Card
  Screen Display Device   17” Color TFT Touch Screen
  Data Input   Keyboard, RS-232, USB, Ethernet, FTP
  Simultaneous Axes   4 Axes / 5 Axes (Option on W Axis)
  No. of Control Axes   5 Axes / 6 Axes (Option on W Axis)
  Min. Command Unit   0.0001mm
  Max. Command Range   ±9999.9999 mm
  Command Type   mm / inch
  Cutting Data Memory   99999 sets
  Ignition Power Supply   32 Steps,53V~138V
  On time   24 Steps
  Off time   43 Stpes
  Discharge Mode   Rough Cut / Skim Cut / Fine Cut


Controller Functions

Backlash compensation Constant / Servo feed Different shape interpolation Auto position (edge, center)
Linear / Circular interpolation Auto power recovery Background edit Soft limit
Cutting path display Trace to break point Star point return Corner control function
Retrace to start point Reference point return Break point return Diagnosis
Reference point setting Taper cutting Auto corner Z axis software limit
Multi-blocks skip Maintenance memo Program edit / copy / delete Manual data input
Cutting log Axis exchange Rotation Auto / Manual feed
Mirror Dry run Single block Short back
Optional stop Block stop Sub program Wire consumption offset
Pitch compensation Parallel compensation 2nd. Soft limit Anti-Collision


Standard Accessories

Upper / Lower Flushing Nozzle Diamond Guide Conductor Plate
Diamond Guide Remove Jig Brass Wire Tool Box
Waste Wire Bin Ion Resin Tank Ion Exchange Resin
Paper Filter Vertical Alignment Jig Water Chiller
SD Master Auto Wire Threading (AWT)  


Optional Accessories

Spray mist Lubricator Pilot Lamp Remote Master
Safety Door Interlock PCD / Graphite Cutting 0.1mm Wire Application
Transformer 45Kg Wire Jumbo Feeder Auto Voltage Stabilizer
X/Y Linear Scale 6th Axis Package (W axis) Alarm Messenger
MST
(AL-400SA/500SA/560SA/600SA)
High Pressure Water Jet Threading
(Not Available with Anti-Collision on Z Axis)

※ All the specifications are subject to change without prior notice.